We have a large selection of clubs, each of which we will custom fit to your specifications using our exclusive "Flex-Fit Tour System" with our own "Flex-Fit Tour Golf Shafts".
All of our golf clubs are fitted and built on our premises, in our professionally equipped workshop by a master clubmaker. In the following paragraphs are some of the explanations about our custom club fitting program. Finally, there's a way to purchase custom fitted golf clubs at a reasonable price that will make it more of a pleasure to play. If you are in or near Akron, OH., please come to our shop and test hit our demos of the styles of clubs we offer.
WE CAN PROFESSIONALLY FIT ANY BRAND OF GOLF CLUBS TO YOU!
TAYLOR-MADE - CALLAWAY - TITLEIST - KZG CUSTOM
MIZUNO - CLEVELAND - ADAMS - COBRA, etc.
DON'T BUY THEM UNTIL YOU TALK TO US!
WE'LL TELL YOU HOW TO GET THE BRAND YOU WANT EXACTLY FITTED TO YOU!
CALL US FOR THIS INFORMATION - 330.253.8000
The largest misconception about buying professionally fitted golf clubs is that you need a perfect swing to be fitted correctly. It is not true! Although we have fitted many professionals, you do not need to have the skill of a professional to be fitted properly.
Through our swing analysis, we can determine where you may need corrections made in your grip, set-up, alignment and address. It becomes more or less a free instruction session!
Remember, you can be fitted properly with any skill level you have.
With our expertise, you will be fitted for proper length (to the 16th of an inch), proper lie angle (to the exact fraction of degree), proper flex (one of our range of over 40), proper flex point for your swing and the club head you choose and proper grip size (to the 64th of an inch).
We arrive at all of these fitting specifications using a combination of dynamic and static measurements.
No appointment needed. Just come in, hit the demo(s), choose the model you want, and we'll fit them to you. Using our own special "Formulated Fitting System", the whole process takes about 30-45 minutes. No other company in the world uses this system....we invented it to make it easier for our clients to be fitted better, fitted faster and to start striking the ball better and playing more consistent golf with much faster and more positive results!
If your fitting was determined by someone asking you how tall you are, you are not fitted properly! Your height is not the factor that should be used by a professional clubfitter. Also measuring from wrist to floor alone is not professional clubfitting either. There are many factors involved to fit you properly. We do those things required to fit you the right way.
We have a tried and true formula that has been used successfully with many golfers since 1990.
We measure your swing factors with an electronic system we found to be the best for our fitting process and our clients. The use of the PRGR Launch Monitor, Auditor Monitor and, the Tempo Trainer 911 and/or Swing Speed Doppler Radar Sports Sensor gives us the exact data that we require to determine your proper fitting.
Our system measures your exact clubhead speed at impact in tenths of miles per hour. Also measured is your exact swing tempo, from clubhead take-away to clubhead impact, in hundredths of seconds and your "smash factor". With this data, we can determine the exact flex, flex point and swing-weight factors to make a proper determination about how our clubmaker will bench make your golf clubs.
Even if you buy a set of irons and woods from us at different times, they will be matched, because we keep a record of every club we make for you. Even if you lose an iron, we can replace it and you can be sure it's the same as the rest of the set. That's something you won't get from buying clubs off the rack! That means your new clubs are a truly registered set.
Graphite shafts are sometimes recommended to gain more distance because they're lighter, but we can accomplish that by using very light steel shafts. The technology of steel shafts has changed a lot in the last few years.....
We will tell you that we recommend steel shafts over graphite shafts, because with graphite shafts you may be giving up 30% to 50% of the feel needed to keep your swing and tempo consistent.
Graphite shafts are not always the answer for golfers that are "older" or women because they need more flex. We can make some steel shafts more flexible than graphite, because steel is stronger than graphite, and will bend more before they reach a breaking point.
If you have a very severe impact problem, it can be overcome by using a "softer" tip steel shaft and/or our exclusively owned "AVS ShaftSerts" or our exclusive "AirShaft System". Call us, we'll tell you about these systems, that were developed by us and can only be found in clubs made by DV Golf.
DV Golf fitting includes:
If you have questions about fitting, call us. (330.253.8000,11am-3pm E.T., Tues-Sat)
No appointment needed. Just come in.......